What should I do if the transparent acrylic sheet has scratches?

Acrylic has the advantages of light weight, low price and easy molding. , Acrylic products can be seen everywhere in our lives. So what if the acrylic board is scratched? Jinbao teaches you two little tricks.

There are 2 ways to deal with scratches on the acrylic surface: 1 is cold polishing, 2 is flame polishing.

Case 1: If there are slight scratches on the transparent acrylic board

Generally, the small scratches on the surface of transparent acrylic can be wiped with toothpaste, and it can be restored by wiping several times.

1. First, clean the surface layer of the acrylic panel and find out where the scratches are.

2. Use a special soft cleaning cloth or suede to dip some toothpaste, and gently wipe the clean acrylic surface layer with mild scratches repeatedly with a little appropriate force. Then wipe it with a special cleaning cloth to check the effect.

Case 2: If the transparent acrylic board is deeply scratched

1. Use water sandpaper (the thinnest), add water to smooth the scratch and its surroundings, rinse with water, and then wipe with suede dipped in toothpaste.

2. If scratches are still visible, it means that the depth of sandpaper is not enough, and it must be operated again.

3. Note: The surface will be atomized after grinding with water sandpaper. After wiping with toothpaste, it can restore the brightness. The degree of grinding with water sandpaper should be determined according to the depth of the scratch.

4. You can use a car electric waxing machine to polish with toothpaste to quickly remove scratches on the acrylic surface.

Acrylic is actually an important thermoplastic that was developed earlier. In recent years, the demand for materials with characteristics such as light weight and high hardness has gradually increased, so acrylic materials stand out among many materials, and acrylic materials have become very fashionable in recent years.

The above-mentioned methods for dealing with scratches on the acrylic surface, I hope it can help you. If you have other information and questions about acrylic, please contact Jinbao.